SMSP300-TVL Lengthening Sump Slurry Pump

SMSP300-TVL Lengthening Sump Slurry Pump

• Product Introduction

Our SMSp300TV-L lengthening sump slurry pump is a300mmsize SP sump slurry pump with extended shaft. It is a single casing, long shaft, vertical slurry pump, which is designed for delivering abrasive, large particle and high-density slurries. Whose pump casing, impeller and rear liner is made of high chrome cast iron. This type vertical centrifugal submerged slurry pump has high interchangeability with Warman slurry pump. Applications of this metal sump slurry pump include: chemical handling, sand and gravel, minerals processing, coal preparation and general tank, pit or hole-in-ground slurry applications. This vertical centrifugal sump slurry pump is available in various standard lengths to suit common sump depths. A suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up.

•Type Notation:

For example: SMSP(SPR)150-SV(L) (SP: SP series Sump Pump; SPR: Rubber Lined Sump Pump;150: Discharge Diameter (mm); SV: Frame Type; L: Extension Type.)

• Product Feature

1. The lengthened shaft series of mud sump slurry pump could be applied to the condition of deep liquid level. It lengthens the shaft and adds the guide bearing on the basis of the standard pump, making its operation more stable and application more extensive, but flushing water should be attached to the guide bearing.

2. Construction of pump inlet is available in three types: standard type with strainer, suction type with strainer, with agitator.

3. No shaft sealing problems.

4. No submerged bearings.

5. Vertical, centrifugal and single-casing structure.

6. The impeller is open structure, be made of high chromium white iron.

7. Heavy duty roller bearings, above mounting plate.

1 Shaft

2 Cylindrical roller bearing

3 Bearing housing

4 Bearing spacer

5 Double row center conical roller bearing

6 Mounting plate

7 Column support

8 Strainer

9 Rear liner

10 Impeller

11 Pump casing

12 Lower strainer

13 Discharge pipe

14 Flushing pipe

15 Coupling part

16 Middle supporting part

• Range of Performance

Capacity 288~1267m3/h

Head 6.5~33m

Discharge diameter: 300mm

• Drive Type

• Type Of Pump Inlet Construction

• Performance Curves

Contact us if you need more details on 12-Inch Lengthening Sump Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Vertical Hard Metal Slurry Pump、300mm Long Shaft Vertical Water Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Vertical Centrifugal Slurry Pump > SP Sump Slurry Pump