Mono Block Self Priming Water Pump

Model NO.: AZX Monoblocl self priming Water Pump


Air Engine Type: Fitted Motor


Transmission: Direct Connection Transmission


Item: Mono Block Self Priming Pump


Pressure: High Pressure


Specification: ISO, SGS, CE


HS Code: 841370




Type: Self-priming Pump With Inner Recirculation


Theory: Water Ring Type


Structure: The Slide


Application: Sewage


Trademark: An pump


Origin: Hebei, China

Mono Block Self Priming Water Pump

Instroduction of Mono block self priming pump



These self priming pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump



components. They are extremely reliable,economical and simple to use,being particularly suitable for domestic



applications such as the automatic distribution of water from small and medium-sized surge tanks, watering



gardens,etc .These pumps should be installed in a covered area,protected against the weather. N.B.it is always



advisable to install a foot valve or a non-return valve on the suction opening.

Specification of Mono block self priming pump

Item	Self Priming Pump
Model	Self Priming Pump-NS-150-260
Inlet and outlet diameter	150/150
Power	15 KW
Suction	10-15m
Lift	15m
Flow(m3/h)	260m3/h
Speed	2000r/min
Surface treatment	Outside or inside anti-corrosion treatment can supply
Inspection	Chemical and physical property inspect
Application	Suitable for the shaft, well, and digging carry water, used for drainage and irrigation

Structural Characterusteristics of Mono block self priming pump



Cast iron pump body



Stainless steel pump body cover



Stainless steel mechanical seal(graphite ceramic)



Brass impeller with centrifugal radial flow type



Protection IP44



With thermal overload protector in single phase motor



NSK bearing or local bearing



Application of Mono block self priming pump



The pump is supplied to pump water from pumping well, native well and river and it can be used for drainage and farmland irrigation.

The pump with deep suction, high lift head, large flow rate and high efficiency etc. it is more convenient to be used.

New water pump, the bearings should not add too much lubricating oil; if it is fever it because the small gap between the new machine element, but it will not affect the pump's quality. It will be better out of the breaking-in period

After 1000 hours' working, the bearing should be cleaned and oil should be changed.

Long-term no use the pump, you should draw water off the pump, coated with anti-oil on the screw and move to the storage room.

Roger Chen

P: +86 311 899 40549

F: +86 311 862 71170

Office C: +86 150 3285 7866

Personal C: +86 137 805 12387

Pls fill and click "send" to send the your requirement to let us do the solution(quotaiton) for you!

Contact us if you need more details on Self Priming Water Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Self Priming Sewage Pump、Sewage Water Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Self Priming Pump