Electric Motor Driven Centrifugal Mining Pump

Model NO.: AM/AMR Mining pump Max.Capacity: >400 L/min Impeller Number: Single-Stage Pump Influent Type of Impeller: Single Suction Pump Pump Casing Combined: Horizontal Split Pumps Impeller: Closed Brand Name: an Pump Power: Electric, 15 - 560 Kw Application: Slurry Liquid, Slage, Sludge, Sewage Seal Type: Expeller Seal/Packing/Mechanical Seal Material: High Crmoni Alloy and Rubber Liner Trademark: An Pump Origin: Hebei, China Max.Head: >150m Driving Type: Motor Working Pressure: High Pressure Pump Position of Pump Shaft: Horizontal Pump Mounting Height: Since Irrigation Centrifugal Pumps Usage: Pumps Model Number: Am/AMR Chemical Slurry Pump Fuel: Diesel and Gasoline Capacity: 12.8 - 1368 M3/Hr Shaft Lubrication: Grease Lubrication, Oil Lubrication Test: Hydraulic and Performance Testing Specification: CE/ISO/SGS HS Code: 8413709990

Electric Motor Driven Centrifugal Mining Pump

Application: 
                                            
Chemical Process
Heavy Minerals
Paper and Pulp
Mill Discharge
Sugar Beet
Slag Granulation
Bottom Boiler and Fly Ash
Cyclone Feed
Power Utilities

 General introduction                                   
 
      AM/AMR series is horizontal, cantilevered centrifugal slurry pump, with reasonable construction, reliable operation, long service life. It is widely used in transporting abrasive or / and corrosive slurry in mining, metallurgy, electric power, coal, chemicals, building, etc. Especially well accepted by coal / chrome washing plant, mineral processing plant, power plant etc.

 
Design Features                                                
 
 Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four  through bolts are required to hold the cartridge type housing in the  frame.
 Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded  elastomers. Elastomer seal rings back all liner joints.
 Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
 Impeller - Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast  in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
 Throat bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
 One-piece frame - A very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for
easy adjustment of impeller clearance.
 
AM,AMR pumps Performance Data                           
 

Model	Clear water performance
	Capacity Q (m3/h)	Head H ( m)	Speed n (rpm)
1.5/1B-AM	12.6~28.8	6~68	1200~3800
	10.8~25.2	7~52	1400~3400
1.5/1B-AMH	16.2~34.2	25~92	1400~2200
2/1.5B-AM	32.4~72	6~58	1200~3200
	25.2~54	5.5~41	1000~2600
3/2C-AM	39.6~86.4	12~64	1300~2700
	36~75.6	13~39	1300~2100
4/3C-AM	86.4~198	9~52	1000~2200
4/3D-AM
4/3C-AM	79.2~180	5~34.5	800~1800
4/3D-AM
4/3E-AMH	126~252	12~97	600~1400
6/4D-AM	162~360	12~56	800~1550
6/4E-AM
6/4D-AM	144~324	12~45	800~1350
6/4E-AM
6/4F-AMH	100~414	34~98	600~1000
8/6E-AM	360~828	10~61	500~1140
8/6E-AM	324~720	7~49	400~1000
10/8ST-AM	612~1368	11~61	400~850
	540~1188	12~50	400~750
10/8E-MM	666~1440	14~60	600~1100
10/8E-MM	540~1188	10~42	500~900
12/10ST-AM	936~1980	7~68	300~800
	720~1620	7~45	300~650
14/12ST-AM	1260~2772	13~63	300~600
	1152~2520	13~44	300~500
16/14ST-AM	1368~3060	11~63	250~550
16/14TU-AM
18/16ST-AM	2160~5040	8~66	200~500
18/16TU-AM
20/18TU-AM	2520~5400	13~57	200~400

 
An Pump Machinery Company to Customers:
 
1)Quality first. We guaranteed every part of the pump must be inspected closely
2)We can help you select suitable pump model according to your working condition and requirements.
3)We can design the related base or engine for your pumps.
4)Fast delivery time, large quantity of spare parts in stock.


If interested,please contact me.
 

Roger Chen

P: +86 311 899 40549

F: +86 311 862 71170

Office C: +86 150 3285 7866

Pls fill and click "send" to send the your requirement to let us do the solution(quotaiton) for you!

Contact us if you need more details on Slurry Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Sludge Pump、Submersible Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Slurry Pump > Others Slurry pump