Centrifugal Dt Fgd Flue Gas Slurry Desulphurization Pump
Basic Info
Model No.: DT
Product Description
Model NO.: DT Impeller Number: Single-Stage Pump Influent Type of Impeller: Single Suction Pump Pump Casing Combined: Horizontal Split Pumps Impeller: Closed Desulphurization Pump Condition: New Feature: Double Casing Trademark: An Pump Origin: China Max.Head: 110m-150m Working Pressure: High Pressure Pump Position of Pump Shaft: Horizontal Pump Mounting Height: Suction Centrifugal Usage: Pump Driver: Electrical Motor or Diesel Engine Material: Chrome Alloy Specification: Class One HS Code: 841370 Centrifugal DT FGD flue gas Desulphurization pump
Production Overview about Centrifugal Dt Fgd Flue Gas Desulphurization Pump The desulphurization pump restricting parts adopt the advanced flow simulation technology to guarantee the reliable pump design and the high operating efficiency.
The anti-corrosion & anti-wear metal and rubber materials which are specifically developed for FGD pumps have been proved by the practice that they can ensure the long-life pump operation. Through adjusting the bearing components to change the impeller position in the pump chamber all-time high-efficient operation of the pump can be achieved. The pump is characterized by the back knock-down structure which is simple and advanced.
It is easy to maintain and repair and it is on need dismantling inlet and outlet water pipes. The containerized mechanical seal specially used for the desulphurization process is adopted and its operation is reliable
Main Features about Centrifugal Dt Fgd Flue Gas Desulphurization Pump
a) The wet parts adopt the advanced flow simulation analysis in the design process to guarantee the reliable performance, high efficiency of the pumps. The customer can make the pump always running in an efficient operation state by adjusting the bearing components in the pump impeller to suit the cavity position of the pump.
b) The pumps are designed with rear-assemblage structure system. They are featured by easy structure and it is easy to repair without dismantling the inlet and outlet pipe of the pump. End bearing adopts imported tapered roller bearings and driving end uses two cylindrical roller bearings with thin oil lubrication. It can promote the bearings?? working condition to prolong the service life of bearings.
c) Mechanical seal is designed according to the structure characteristic of desulphurization pump, slurry characteristic and the application characteristic. It is cartridge mechanical seal. It has good performance, long service life.
d) The FGD (Flue Gas Desulfurization) equipment of the pump is made of a new type of material A49 duplex stainless white iron which is specially developed by our company itself. The new material has significant corrosion-resistant and wear-resisting performance. The pump, pump cover and splice plates are pressure parts and made of ductile cast iron. The impeller and suction cover is made of the A49 dual-phase stainless white iron. The material of cover plate liner, frame plate liner, and rear liner is natural rubber with natural good abrasion performance, light weight, relatively low cost.
Main Usages about Centrifugal Dt Fgd Flue Gas Desulphurization Pump
It is mainly applied in the power plant for the absorption tower circulation pump to transmit corrosive slurry.
Power plant, steel plant for flue gas desulphurization.
Technical Data about Centrifugal Dt Fgd Flue Gas Desulphurization Pump
Construction about Centrifugal Dt Fgd Flue Gas Desulphurization Pump
Diemensional drawing about Centrifugal Dt Fgd Flue Gas Desulphurization Pump
Curve chart about Centrifugal Dt Fgd Flue Gas Desulphurization Pump
About our company: Contact us if you need more details on Desulphurization Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Flue Gas Desulphurization Pump、FGD Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.
Production Overview about Centrifugal Dt Fgd Flue Gas Desulphurization Pump The desulphurization pump restricting parts adopt the advanced flow simulation technology to guarantee the reliable pump design and the high operating efficiency.
The anti-corrosion & anti-wear metal and rubber materials which are specifically developed for FGD pumps have been proved by the practice that they can ensure the long-life pump operation. Through adjusting the bearing components to change the impeller position in the pump chamber all-time high-efficient operation of the pump can be achieved. The pump is characterized by the back knock-down structure which is simple and advanced.
It is easy to maintain and repair and it is on need dismantling inlet and outlet water pipes. The containerized mechanical seal specially used for the desulphurization process is adopted and its operation is reliable
Main Features about Centrifugal Dt Fgd Flue Gas Desulphurization Pump
a) The wet parts adopt the advanced flow simulation analysis in the design process to guarantee the reliable performance, high efficiency of the pumps. The customer can make the pump always running in an efficient operation state by adjusting the bearing components in the pump impeller to suit the cavity position of the pump.
b) The pumps are designed with rear-assemblage structure system. They are featured by easy structure and it is easy to repair without dismantling the inlet and outlet pipe of the pump. End bearing adopts imported tapered roller bearings and driving end uses two cylindrical roller bearings with thin oil lubrication. It can promote the bearings?? working condition to prolong the service life of bearings.
c) Mechanical seal is designed according to the structure characteristic of desulphurization pump, slurry characteristic and the application characteristic. It is cartridge mechanical seal. It has good performance, long service life.
d) The FGD (Flue Gas Desulfurization) equipment of the pump is made of a new type of material A49 duplex stainless white iron which is specially developed by our company itself. The new material has significant corrosion-resistant and wear-resisting performance. The pump, pump cover and splice plates are pressure parts and made of ductile cast iron. The impeller and suction cover is made of the A49 dual-phase stainless white iron. The material of cover plate liner, frame plate liner, and rear liner is natural rubber with natural good abrasion performance, light weight, relatively low cost.
Main Usages about Centrifugal Dt Fgd Flue Gas Desulphurization Pump
It is mainly applied in the power plant for the absorption tower circulation pump to transmit corrosive slurry.
Power plant, steel plant for flue gas desulphurization.
Technical Data about Centrifugal Dt Fgd Flue Gas Desulphurization Pump
Model | Power | Flow | Head | Speed | Eff | NPSH | Partical | Weight |
Q | H | n | T(kg) | |||||
N(kw) | (m3/h) | (m) | (r/m) | η(%) | (m) | (mm) | ||
800DT-A90 | 900 | 3142-9700 | 6.0-28.7 | 300-592 | 89.3 | 2 | 181 | 5900 |
700DT-A84 | 630 | 2157-7360 | 5.2-24.5 | 300-591 | 88.8 | 2.0 | 168 | 5420 |
600DT-A82 | 500 | 1664-5600 | 5.2-27.8 | 300-595 | 88.3 | 2.2 | 152 | 4900 |
500DT-A85 | 400 | 1036-4080 | 5.7-26.8 | 300-591 | 84.7 | 3.1 | 135 | 4500 |
350DT-A78 | 500 | 720-2865 | 11.6-51.1 | 400-740 | 78 | 3.5 | 104 | 3700 |
300DT-A60 | 400 | 580-2403 | 8.9-53.1 | 490-989 | 81.1 | 4.3 | 96 | 2790 |
200DT-B45 | 90 | 138-645 | 5.7-31.0 | 490-990 | 80.8 | 2.0 | 51 | 1750 |
150DT-B55 | 132 | 139-630 | 11.3-53.7 | 490-990 | 78.1 | 2.3 | 56 | 1540 |
150DT-A50 | 90 | 62-279 | 9.3-44.6 | 490-980 | 65.7 | 2.1 | 30 | 1470 |
150DT-A50 | 90 | 63-279 | 9.3-44.6 | 490-990 | 65.7 | 2.1 | 30 | 1470 |
150DT-A40 | 132 | 122-503 | 11.2-61.2 | 700-1490 | 73.1 | 2.6 | 40 | 830 |
100DT-A45B | 90 | 41-219 | 12.1-76.4 | 700-1480 | 51.8 | 2.4 | 24 | 800 |
100DT-B40 | 75 | 61-268 | 12.0-61.0 | 700-1480 | 70.4 | 1.7 | 29 | 620 |
100DT-A35 | 75 | 77-323 | 8.8-45.9 | 700-1480 | 70.4 | 1.9 | 42 | 550 |
80DT-A36 | 37 | 41-167 | 8.9-47.1 | 700-1480 | 62.4 | 1.5 | 16 | 480 |
65DT-A40 | 55 | 34-159 | 12.2-63.2 | 700-1480 | 62.1 | 2.1 | 16 | 490 |
65DT-A30 | 22 | 21-99 | 7.0-35.6 | 700-1470 | 54.6 | 2.2 | 19 | 260 |
50DT-D40 | 30 | 16-76 | 9.5-51.7 | 700-1480 | 45.1 | 1.2 | 10 | 320 |
50DT-A30 | 18.5 | 16-78 | 6.1-36.3 | 700-1460 | 48.5 | 0.8 | 16 | 210 |
40DT-A25 | 45 | 16.8-74.7 | 13.7-88.6 | 1400-2950 | 42.5 | 2.6 | 9 | 185 |
40DT-B20 | 15 | 7.9-37.1 | 10.7-57.5 | 1400-2930 | 53 | 0.9 | 7 | 160 |
40DT-A19 | 15 | 7.8-34.9 | 12.3-57.1 | 1400-2930 | 58.8 | 1.2 | 11 | 173 |
40DT-A17 | 7.5 | 4.6-23.4 | 9.2-44.6 | 1400-2900 | 52.4 | 2.5 | 11 | 127 |
25DT-A25 | 4 | 4.7-19.9 | 3.3-21.6 | 700-1440 | 38 | 3.3 | 5 | 107 |
Construction about Centrifugal Dt Fgd Flue Gas Desulphurization Pump
Diemensional drawing about Centrifugal Dt Fgd Flue Gas Desulphurization Pump
Curve chart about Centrifugal Dt Fgd Flue Gas Desulphurization Pump
About our company: Contact us if you need more details on Desulphurization Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Flue Gas Desulphurization Pump、FGD Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Slurry Pump > Others Slurry pump
Premium Related Products
Other Products
Hot Products
Centrifugal Zj Horizontal and Zjl Vertical Slurry PumpGravel Sand Pump for Dredger Mud PumpCentrifugal Mining Vertical Slurry Sump PumpHigh Pressure Boiler Feed Water PumpHeavy Duty High Pressure Mining Metal Lined Sludge Slurry PumpCentrifugal Horizontal High Pressure Multistage PumpSand Gravel Pump Marine Dredger Mud PumpHigh Abrasion and Corrosion Resistance Slurry PumpMultistage Centrifugal Water PumpFgd Pump (TLR)Stainless Steel Chemical Pump (IH)Pump AccessoriesFroth Slurry Pump for MiningDredger Gravel Slurry PumpPn Pnl Single Stage Single Suction Mud PumpPw, Pwl High Pressure Machinery Sewage Single Stage Centrifugal Pump