High Pressure High Lift Multi Stages Pressure Booster Pump

Model NO.: booster pump Structure: Multistage Pump Power: Electric Type: Positive-Displacement Pump Industry: Boiler Pump Performance: No Leakage Pump Condition: New Pump Without Motor Connect: Belt or Coupling Trademark: An Pump Origin: China Material: Cast Iron Assembly: Booster Pump Start Up: Electric Pump Application: Clarified Water Pump, Sewage Pump, Chemical Pump, Boiler Pump Media: Water Pump Theory: Centrifugal Pump Pump Without Motor Driver: Electrical Motor or Diesel Engine Stages: Multistages Specification: Class One HS Code: 841370 High pressure high lift multi stages pressure booster pump without motor 

General
QDG series boiler feed high pressure hot oil booster pump without motor is multi-stages centrifugal pump. It used for boiler water feed or other industry hot water supply projects.
QDG series hot water pump matches the performance, technical requirement and testing method for the international boiler projects.
This series hot oil booster pump meet the international standard, with the feature of small volume, good performance, stable and reliable operation, and high efficiency. Besides, it is the best choice for the hot water supply projects.
hot water pump included horizontal Boiler Feed Water Pump and vertical boiler Feed Water Pump.
QDG series booster pump is multi-stages centrifugal pump. It used for boiler water feed or other industry hot water supply projects.
QDG series hot water centrifugal pump matches the performance, technical requirement and testing method for the international boiler projects.
This series boiler booster high pressure water pump meet the international standard, with the feature of small volume, good performance, stable and reliable operation, and high efficiency. Besides, it is the best choice for the hot water supply projects.
It included horizontal boiler feed water boiler feed water pump and vertical boiler feed water pump.
   
Performance Range
Flow rate: 3~500m3/h
Head: 70~650m
Pressure: 7~65Bar
Speed: 1450~2950rpm
Max Eff: 90%
 
 
Applicationfor boiler feed high pressure hot oil booster pump without motor 
 Aerospace                          Oil & Gas
 Building industry                 Power Station
 Chemical                            Petro-Chemical
 General Industry                Pharmaceutical
 Marine                                Pulp & Paper
 Mining & Aggregate            Water & Waste water
 
Advantage:
20 years in producing horizontal boiler feed high pressure hot oil booster pump without motor 
Independent Design
advanced technology from Australia, Canada, America
Specialized Test Equipment
Anti-rust treatment casting
Supply reasonable suggestion for choosing pumps
OEM available

 Performance Data Sheet for pump without motor 

Pump Type	Flow (m3/h)	Head (m)	Power (KW)	Speed (r/min)
QDG 6-25	3.75-7.5	73.5-306	4-11	2950
QDG 12-25	7.5-15	69-338.4	5.5-22	2950
QDG 12-50	7.5-15	139.5-648	18.5-75	2950
QDG 25-30	15-30	82.5-340	15-45	2950
QDG 25-50	15-30	15.78-618	22-110	2950
QDG 46-30	30-55	81-340	22-75	2950
QDG 46-50	30-55	138-666	37-132	2950
QDG 85-45	55-100	78-459	37-160	2950
QDG 85-67	55-100	183-666	90-250	2950
QDG155-67	100-185	177-684	132-400	2950
QDG280-43	185-335	114-423	160-450	1480
QDG280-65	185-355	372-680	500-800	1480
QDG450-60	335-500	171-650	360-1050	680

RFQ:
Tips for boiler feed high pressure hot oil booster pump installation
 Please take note as below when install the high pressure water pump:
1. The preformed hole on the foundation should be poured as the pump installation drawing.
2. The installation level should meet the demand of the allowed vacuum suction height. The foundation should be in horizontal and stable condition, to make sure the rotation of the driver machinery same with the pump in the direction.
3. When connect by coupling, must make sure the pump and driver shaft center  should be in a straight line.
4. If belt connection, the shaft center should be in parallel.
5. The boiler feed water pump suction pipe should be sealed well, and try to less the quantity of the elbow and check valve. When fill water, exhausted the air. It should be no any air when operate. We need to keep the suction pipe slopes up slightly, and then connect with the pump inlet.


Contact


Sherry Lee
Shijiazhuang An Pump Machinery Co.,Ltd
www.angroupcn.com
Tel:86-311-89940549   Fax:86-311-86271170
Anything thing need help, please call me any time, i will try best to help you..

Contact us if you need more details on Booster Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about High Lift Pump、Pressure Booster Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Multistage Pump > Others Multistage Pump