Corrosion Resist Sulfuric Acid Caustic Soda Transfer Chemical Pump

Model NO.: QI Chemical Pump Max.Capacity: 1200m3/H Impeller Number: Single-Stage Pump Influent Type of Impeller: Single Suction Pump Pump Casing Combined: Verticaljoint Surface Pump Impeller: Closed Stages: Single Stage Driver: Diesel or Motor Shaft Seal: Packing or Mechanical Seal Trademark: An Pump Origin: China Max.Head: 110m-150m Driving Type: Motor Working Pressure: High Pressure Pump Position of Pump Shaft: Horizontal Pump Mounting Height: Suction Centrifugal Usage: Circulating Pump Suction: Single Suction Connect: Direct or Belt Connect Service: Overseas Engineer Specification: Class One HS Code: 841370 Corrosion resisting sulfuric acid and caustic soda transfer chemical pump
 
Corrosion Resisting Sulfuric Acid Caustic Soda Transfer Chemical Pump Introduction:
QI seriese chemical pump is single-stage , single-uction centrifugal pump.
It is a replacement of type IBA Water Pump which is applicable to industrial and urban water supply and discharge as well as the agriculture irrigation .
It can be used to transport liquid which have physical and chemical properties similar to clean water with a temperature not exceeding 80°
QI series chemical pump  is designed according to the functions and dimensions the international standard ISO2858 requires by our company .
It is suitable for acid or alkali liquid chemical delivery.
 
Corrosion Resisting Sulfuric Acid Caustic Soda Transfer Chemical Pump performance:
1.Capacity:3-760m3/h
2.Head:2-446.8 m 
3.Speed:1480 r/min
4.Efficiency: 67.5%-84.5%
5.Power: 3-110 KW
 

Chemical Pump Performance Table
Pump Type	Capacity (m3/h)	Head (m)	Speed  (rpm)	Motor Power(kw)	Eff (%)
QI 50	3-14	3.7-82	1450-2900	0.55-11	21.5-60
QI 65	6-30	3.8-115.4	1450-2900	0.55-30	25-75
QI 80	12-60	3.6-128	1450-2900	0.55-37	39-75
QI 100	24.3-120	3.7-133	1450-2900	1.1-75	51-78
QI 125	51.4-240	8.4-133	1450-2900	4-110	52-81
QI 150	104-240	13-53	1450	11-45	62-81
QI 200	194-460	13.1-55	1450	22-90	65.5-82
QI 250	320-760	22.6-52	1480	75-132	67.5-84.5
QI 300	530-1200	21.9-38	1480	90-132	61.66-107.6

 
Corrosion Resisting Sulfuric Acid Caustic Soda Transfer Chemical Pump Application: 
1)Clean, thin, non-corrosive, non-flammable or non-explosive liquid without grain or fiber;
2)Water supply system;
3)Heat, air condition system;
4)Booster, constant pressure water supply;
5)Firefighting, splitting system;
6)Irrigating, farming;
7)Industry chemical projects cooling, heater circulation system;
8)Industry transferring, drainage system;
 
FAQ
The Corrosion Resisting Sulfuric Acid Caustic Soda Transfer Chemical Pump cavitation phenomenon:
Centrifugal pump cavitation phenomenon is due to the liquid to be delivered in transporting temperature saturated vapor pressure is equal to or below the pressure at the entrance of pump blade and partial vaporization.
Vaporization produces steam, form bubbles.
The bubbles move forward step by step, as the liquid reaches a certain height, the bubbles sharply shrink and burst out. Liquid particle filling holes at high speed, and have a strong impact on the metal surface which makes it peel off, and cause the pump noise and vibration, when serious, the capacity, head and efficiency of the pump reduce significantly.
The centrifugal pump cavitation phenomenon is not allowed to happen under normal operation.
The key to avoid cavitation phenomenon is the installation height of the pump should be correct, especially should pay more attention when conveying high temperature and easy volatile liquid.

Contact us if you need more details on Chemical Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Transfer Chemical Pump、Caustic Soda Chemical Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Chemical Pump