Automatic Grinding Machine Control System

Automatic Grinding Machine Control System

Optional Automated Control Services allows the user to achieve unrivalled levels of performance and versatility. With both variable speed and variable angular stroke the classification control system improves and ensures the quality of flatness and increases stock removal. Automatic grinding system also extends the unit’s life as a result of the uniform wear across the entire platen surface.
The radial mouvement of the head is equipped with end of stroke system, granting the fully automatic displacement in both directions. The column is completely protected against the abrasive dust. The vertical lowering of the grinding head is achieved with infinitesimal adjustments by operating on the top handwheel having 0.05 mm graduations.
The machine, made from rugged plate, is supplied complete with control panel, coolant/decantation tank (by water and emulsifying oil), motor pump, set of abrasive sectors, safety chip guard that when removed, stops automatically the machine.

Product Features

Strong environmental adaptability: Iron Slurry Analyzer can adapt to the harsh industrial site environment.

Highly corrosive environment: The probe is made of corrosion-resistant materials and can adapt to most corrosive environments such as strong alkalis.

There are no special requirements for the composition of the materials to be measured: it is not affected by bubbles; it is low affected by large particles; it is not affected by magnetic interference.

The detection range of particle size is wide: the maximum size range of 60 percentage points can be detected, and the minimum size range of 20 percentage points can be detected.

The size fraction span is large: The particle size analyzer measurement can be achieved in the diameter of the grain between 20μm to 1000μm.

Product Parameter

The maximum detectable flow channel number 1
The number of size fraction that can be detected at the same time in each channel ≤2
The grain diameter range that can be detected (μm) 20 ～ 1000
The nominal detectable particle size interval per size fraction (%)
Size fraction	Interval
μm：-75 ～ -850 mesh：200 ～ 20	20 ～ 80
μm：-45 ～ -75 mesh：325 ～ 200	30 ～ 70
μm：-25 ～ -45 mesh：500 ～ 325	70 ～ 95
Maximum nominal particle size span (percentage point) 30
the absolute error in the 1σ (%) 1 ~ 2
Analog output：4 ~ 20mA
Level of protection：detector：IP65；main control box：IP54
Ambient temperature：0 ~ +50℃
Medium environment：1 ~ 90℃
Medium pressure：86 ~ 106KPa
Power supply：220V AC，50Hz，50W

Product Application

It is mainly used to detect and analyze the particle size of the hard grain in the liquid and solid mixture slurry. PSI can be used in the grinding and dressing fields of black metal industry, basic metal industry, industrial mineral industry, and gold industry.

Contact us if you need more details on Automatic Grinding Classification Control System. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Automatic Grinding Machine、Automatic Grinding Wheel Balancer. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Beneficiation Automation